What to do if the toilet fill valve does not stop water

1. If you find that the toilet fill valve can’t stop the water all the time, you need to slowly drain the water in the toilet tank until it falls. Then observe with the naked eye to see if the flushing area will leak. If there is water leakage, it means that the water tank is cracked. If there is no leakage, you need to open the triangle valve and put the water on the drain to see if there will be water leakage when the toilet is filled with water. All need to be checked, can not be ignored, otherwise it is difficult to find out the reason. 2. Next is to check whether there is a blockage problem in the toilet inlet valve, whether there is any foreign matter, if there is, it is likely that the object is pressing the top of the inlet valve, which causes the inlet valve to fail to stop. If you encounter this kind of situation, it is more complicated to deal with, and the user cannot repair it by himself. It is recommended to find a local professional toilet master for on-site repair.

3. Interval cleaning is also very helpful for the toilet fill valve to stop the water. It can effectively reduce the occurrence of non-stop water. Before cleaning, the water in the water tank needs to be completely drained, so that we can clean it up. For the water inlet valve, we’d better remove it for cleaning, carefully remove each part, clean it with a special detergent, and dry it before proceeding to assemble the water inlet valve.


Post time: Nov-26-2021